Sauna Elite

Product Guide
15min
1 person

Sauna Frame

Joints: There are three different joints used in the assembly of the frame. They are labelled from 1-3 in the below images.

Poles: There are four different poles used in the assembly of the frame. You will find a sticker on each pole with letters from A-D.

Use the above diagram as a reference when assembling the frame. The straight poles are coloured letters while the joints are numbered.

Setup & Assembly

1
Open the cover and locate the bottom area where the frame will be placed. Build the bottom level of the frame according to the diagram and insert it into the cover.
The bottom material is different from the walls of the cover and is in the shape of a pentagon.
2
Build the remainder of the frame according to the diagram. Ensure all the poles are fully inserted into the joints with medium pressure.
3
Pull the cover up, over and around the frame. The cover will have a tight fit around the frame.
A second person can assist with this step.
4
Seal the sauna by closing the zip around the door. Your sauna is now assembled and ready to add a steamer.

Steamer Instructions

For detailed guides on your specific steamer model, please click on the image:

Before First Use

To ensure a smooth introduction to the experience, we recommend starting conservatively and gradually acclimating to the Sauna's capabilities. For newcomers and seasoned users alike, we advise initiating your session at levels P06-P08. Begin your session with a modest duration of 8-15 minutes, extending it gradually as you grow accustomed to the sensation. Should you encounter any issues with temperature consistency or heating performance, double-check that all zippers are securely fastened and gaps closed to prevent steam leakage. Remember, the therapeutic benefits typically manifest in 5-10 minutes of exposure to steam. Be sure to take periodic breaks and maintain proper hydration throughout your session. Before proceeding, please read the entire guide to ensure the safe, correct usage and maintenance of the product.

Cleaning & Maintenance

To extend the life of your equipment, please clean regularly without using any harsh chemicals. Wipe down the interior of the sauna with a damp cloth after use and never store the sauna without proper cleaning and drying. The machine-washable water absorbent mat should be washed after every use. Storage: Store the equipment in a cool, dry area.

Safety Guidelines

ALWAYS consult your doctor before using a Sauna. Children, pets and vulnerable adults must always be supervised when in the vicinity of an operating Sauna and should never enter. Ensure only clean, purified water is used, preferably distilled, to avoid damaging the lid and steamer. Do not overfill the steamer; keep water levels below the marked maximum line. Always securely tighten the lid to prevent steam leakage and ensure pipes remain unfolded for clear steam passage. Avoid direct contact with hot surfaces, including pipes and the steam box. Never open the lid during or immediately after use; allow at least 15 minutes for cooling. Add only water to the steamer; use the steam box for essential oils or herbs. Operate the steamer away from flammable materials, and ensure proper ventilation in the room. Keep the steamer on a stable surface to prevent accidents.

If you require any further assistance with your Sauna Elite please contact us here 🙂

Was this product guide helpful?
Submit